Bosch Dual-Fuel Slide-In Range User Manual

Installation

English 18

1. Plug in power cord.
2. Slide range into opening, being careful not to damage countertops, floors, or 

the range drawer front. Do not apply pressure to cooktop when sliding into 
position. Be careful not to crimp flexible connector.

3. Wipe up soapy water.

1. When properly installed, the cooktop trim around the back of the range will 

rest lightly on the countertop. 

2. There should not be any gap between the countertop and the trim; however, 

the weight of the range must not rest on the countertop. Look under the range 
to verify that both back legs are resting solidly on the floor. Also verify that the 
left range leg is under the anti-tip bracket.

3. If the back legs are not resting solidly on the floor or the left leg is not under 

the anti-tip bracket, slide range out, adjust legs and slide back in.

Tip:
1. If the range does not slide easily:

Use soapy water to dampen the following pressure points:
•

countertop

•

foam tape

•

floor under range legs

2. Remove drawer and oven door to prevent damage
3. To prevent damage to the appliance, push on the frame around 

the oven cavity opening.

Note:
When replacing a free-standing model, the backwall trim strip should 
be flush with the wall.

Verify that the weight of the range is not resting on the countertop. 
This could result in damage to the countertop and the appliance.

adjustable leg

wrench

drawer