Bosch D1260 User Manual

D1260/D1260B | Owner's Manual | Part III: Advanced Commands - BYPASS A POINT?  (COMMAND + 0) 

 

 

Bosch Security Systems | 9/04 | 50410D 

33 

 

times. 

User Passcodes 

A three to six digit number entered at a keypad to access the system. 

 

BYPASS A POINT?  (COMMAND + 0) 

Description 

This command allows you to bypass points that you do 
not want included in the system. Points that are not 
included in the system do not detect intruders and 
cannot send any reports. You can bypass points when 
an area is disarmed. Bypassing a point reduces the 
level of security and should be used with discretion. 
Points remain bypassed until you unbypass them or 
some points may return when the area is disarmed. See 
Unbypassing a Point (COMMAND 00). 

You could use 

COMMAND 0 to leave a window open 

over night without initiating an alarm. Also see Turning 
the System On With Doors or Windows Open. 

Using Bypass a Point 

1.

 

The display shows disarmed idle text. 

 

Press the 

COMMAND key. The display shows 

*System Command*

. 

 

2.

 

Press the 

0 key. 

 

If you prefer, you may use the Command 
Menu in place of steps 2 and 3 to initiate 
this function. 

Press the MENU> soft key to enter the 
Command Menu. 

Press NEXT> soft key repeatedly. 

When you reach the BYPASS A POINT 
?> prompt, press its adjacent soft key. 

Press ENTER. 

 

 

3.

 

You will prompted for your passcode. It will 
appear on the display as asterisks (*). 

 

4.

 

The display changes to show 

Enter point number 

or press next key

.