Bosch D1260 User Manual
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2)
36
Bosch Security Systems | 9/04 | 50410D
•
FRONT DOOR is already bypassed.
indicates that the point has already been
bypassed.
bypassed.
•
FRONT DOOR cannot by bypassed.
indicates the system is programmed not to
allow that point to be bypassed.
allow that point to be bypassed.
•
Invalid point Please try again.
indicates that
the entered point doesn’t exist and the display
returns to allow another point to be entered.
returns to allow another point to be entered.
•
No additional points.
indicates that there are
no more points that can be bypassed.
6.
You can return to idle text by pressing
<Exit.
7.
If you are attempting to unbypass a 24-Hour or
Fire Point that is still faulted, the keypad will
display
Fire Point that is still faulted, the keypad will
display
Cannot unbypass 24hr faulted points.
SEND REPORT ? (COMMAND + 4+1 or
4+2)
Description
This function tests the communication link between
your security system and your security company. It is
an important part of maintaining a high level of
security for your property.
your security system and your security company. It is
an important part of maintaining a high level of
security for your property.
Two types of test reports may be sent. The first type of
report is a simple test report (Command 41). The
second type of report is a status report (Command 42).
This status report indicates the current condition of
your system.
report is a simple test report (Command 41). The
second type of report is a status report (Command 42).
This status report indicates the current condition of
your system.
Using Send Report
1.
Always call your security company before sending
a test report.
a test report.
2.
The display shows disarmed idle text.
Press the
COMMAND key. The display shows
*System Command*
.
3.
Press the
4 key then the 1 key to send a test report.
Press the
4 key then the 2 key to send a status
report.