Bosch Appliances Home Security System DVR4C User Manual

Bosch Security Systems | Version 1.1

DVR4C Remote Viewer | Operation Manual | Configuration Tool

EN | 12

5.2.1  Information tab

The Information tab shows basic information about the 

DVR.

5.2.2  Camera

Use this tab to set the video gain, brightness, and contrast 

for the cameras connected to the DVR.

5.2.3  Recording

Use this tab to set the Normal Recording and Event 

Recording parameters.

5.2.4  Event setup

Set the configuration of alarm inputs and the motion 

detection in this tab.

5.2.5  Profiles

Use this tab to set the applicable periods for Weekday / 

Weekend and day / night. Up to 30 exception days can be 

configured.

5.2.6  System Settings 

Use this tab to configure the various system settings.

5.2.7  Connectivity 

Use this tab to set the DVR's network information; Ethernet 

IP address, xDSL, PSTN and port settings.

> For more information, refer to the Network settings menu 

of the DVR4C manual.

5.2.8  Disk manager

Disk setup

•

When the Recording mode is set to Continuous (default), 
the DVR overwrites older images when the hard disk is 
full. When set to Linear, the DVR stops recording when 
the hard disk is full and the administrator has to delete 
video manually. 

•

Set a disk full warning percentage from 1 to 100% 
(default 95%). A warning message is generated when the 
used disk space exceeds the percentage set.

Block playback

•

To block the playback of video that is older than a 
certain time, select a period from the drop-down list. 
This function is disabled by default.

5.2.9  Security tab

Use this tab to control access to the DVR. If you select IP 

filtering, you can set up to ten IP address ranges that are 

allowed or denied access to the DVR. The values you set 

will normally depend on your network setup. 

The IP address can be within a range from 000.000.000.000 

to 255.255.255.255.