Bosch Appliances Home Security System DVR4C User Manual

Bosch Security Systems | Version 1.1

DVR4C Remote Viewer | Operation Manual | Configuration Tool

EN | 11

Configuration Tool

The Configuration Tool allows an administrator to

configure the DVRs connected to the network and their

associated cameras.

5.1

Registering a DVR

1. Click the

Add

button in the left bottom corner.

2. Enter a DVR Name for local use, a User name, and a

Password.

> The name can be up to 30 characters long.

> The default values of User name/Password are admin/

admin

3. Select either a Ethernet or dial-in connection for the

DVR you want to register.

> A phone number is required for a dial-in connection.

4. Enter an IP Address and a Port number or click

Auto-

detect

and select an IP address from the list.

5. Click

5.2

1. Select a DVR in the list of DVRs.

2. Enter the password and click

> The Configuration Tool requires administrator rights to log

on to a DVR. The administrator ID is always admin. The

password is set in the

Connectivity

menu of the

DVR4C.

> If a DVR's configuration menu is activated or remote setup

is configured as Disable, login is blocked.

When you log in, nine tabs are shown:

•

Information

•

Camera

•

Recording

•

Event setup

•

Profiles

•

System settings

•

Connectivity

•

Disk manager

•

Security

Each of these tab pages allows you to configure different

functions of the selected DVR. When you change the value

of an item in any of the tabs, click the

Apply

button to

confirm the change. Click the

Cancel

button to discard

changes.

For more information on the settings that can be changed,

refer to the DVR4C Installation Manual.