Bosch Appliances Home Security System DS7400XIV4-EXP User Manual
DS7400XiV4-EXP | User Guide | 6.0 Day to Day Operations
EN | 16
Bosch Security Systems | 6/05 | 4998154961B
6.2.6 Automatic
Disarming
You can program each area to disarm automatically once per day. You cannot program automatic disarming from
an RF (wireless) keypad.
an RF (wireless) keypad.
If your program automatic disarming in Master Keypad mode, it affects all areas you have access to. If
programmed in single area mode, or from a single area keypad, it affects only the area you are working in.
programmed in single area mode, or from a single area keypad, it affects only the area you are working in.
Do this procedure at a text keypad because no visual clues are provided from an LED keypad.
Table 14: Automatic Disarming
Setting the Automatic Disarming Time
Notes
[Master PIN][#][0]
You can only set the automatic disarming time in Master Programming Mode.
[4]
To enter the automatic disarming setup programming.
Enter the area number.
Press [#] to exit.
Press [#] to exit.
• If you are programming from a Master Keypad that is not in Single Partition
Mode, you are prompted to enter the area to program.
• You are allowed to program only the areas to which you are assigned.
• If you are programming from a standard keypad or from a Master Keypad in
Single Partition Mode, skip this step.
Enter a time for each day in
24-hour clock format
24-hour clock format
• Programming starts with Sunday. The keypad displays “Sunday –nn : nn”
• Enter the time in 24-hour clock format and press the [#] key. If you make a
mistake, press the [#] key twice to move back to your last entry.
• Time examples:
12 midnight = 2400#
12 noon = 1200#
12:01 am = 0001#
12:01 pm = 1201#
1:00 am = 0100#
1:00 pm = 1300#
Disabled = 0000#
6.2.7 Delayed
Arming
Delayed arming causes the system to arm after a specified number of hours. Delayed arming is not available from
RF (wireless) keypads. You can use delayed arming even if there are no automatic arming times programmed. If
delayed arming is used in Master Keypad mode, it affects all areas you have access to. If it is used in Single
Partition Mode, or from a single area keypad, it affects only the area you are working in.
RF (wireless) keypads. You can use delayed arming even if there are no automatic arming times programmed. If
delayed arming is used in Master Keypad mode, it affects all areas you have access to. If it is used in Single
Partition Mode, or from a single area keypad, it affects only the area you are working in.
Delayed arming overrides the automatic arming time. Delayed arming also provides a 15-minute pre-
arming period like the one provided with automatic arming.
arming period like the one provided with automatic arming.
Table 15: Delayed Arming
Setting Delayed Arming
Notes
[PIN][#][9][9]
• To enter the delayed arming setup programming.
• The keypad displays:
“Arm in nn Hours
# to accept”
Enter the number of hours to
delay arming in [0][1] format.
delay arming in [0][1] format.
Enter the number of hours from the current time that you want the system to wait before
arming.
arming.
For example, if it is 3:00pm, and you want the system to arm at 9:30pm, enter [0][6][#]