Bosch Appliances Home Security System DS7400XIV4-EXP User Manual

DS7400XiV4-EXP | User Guide | 6.0   Day to Day Operations 

EN | 17 

 

 

Bosch Security Systems | 6/05 | 4998154961B 

 

6.2.8 Chime 

Mode 

Chime Mode causes the keypad sounders to beep each time a Perimeter or Entry/Exit zone is triggered when the 
control panel is off (disarmed). The [#][7] command is used to turn Chime Mode both off and on. 

 

Table 16: Chime Mode 

 

 

 

 

Action 

Equipment 

Command Sequence 

What Happens 

Turn On 
Chime Mode 

Text keypad 
LED keypad 
RF3341 keypad 

[PIN][#][7] 

•  “Chime Mode On” is displayed for 5 seconds. * 

•  The LED flashes indicating a signal was sent to your security 

system.  ** 

•  Keypad sounders beep for 2 seconds whenever a Perimeter 

or Entry/Exit zone is triggered. 

Turn Off 
Chime Mode 

Text keypad 
LED keypad 
RF3341 keypad 

[PIN][#][7] 

•  “Chime Mode Off” displays for 5 seconds. * 

•  The LED flashes indicating a signal was sent to your security 

system.  ** 

•  Chime Mode is turned off. 

* Text Keypad only 

** LED Keypad only 

 

6.2.9 Access 

Control 

Your system might use a keypad key sequence to activate other electrical devices. Access control is not available 
from an RF (wireless) keypad or from the keyfobs. Refer to Access Code on page 24. 

 

 

 

This feature can be used in armed or disarmed modes. 

 

The special PIN required to perform this function is known as an Access Control PIN. This PIN can control 
devices that are activated for a short period of time (for example, electric locking mechanisms on a door). Access 
PIN activations are recorded in the History Buffer. 

 

Table 17: Access Control 

 

 

 

 

Type of Disarming 

Command Sequence 

What Happens 

Momentary Access Control Panel Activation 

[Access Control PIN][Off] 

The access device is activated for 10 seconds.