Bosch Appliances Home Security System D1265 User Manual

D1265 | Owner's Manual | Part III: Advanced Commands  

 

34 

Bosch Security Systems, Inc. | 9/10 | F01U169130-02

 

No additional points indicates that there are 
no more points that can be bypassed. 

 

If an unbypassed point is entered, an error tone 
will sound and a warning will be displayed. 

 

The display returns to idle text. 

7.  If you are attempting to unbypass a 24-Hour or 

Fire Point that is still faulted, the keypad shows 
Cannot unbypass 24hr faulted points. 

 

 

Send Report (CMD + 4+1 or 4+2) 

Description 

This function tests the communication link between 
your security system and your security company. It is 
an important part of maintaining a high level of 
security for your property. 

Two types of test reports can be sent. The first type of 
report is a simple test report (Command 41). The 
second type of report is a status report (Command 42). 
This status report indicates the current condition of 
your system. 

Using Send Report 

1.  Always call your security company before 

sending a test report. 

2.  Ensure the display shows disarmed idle text. 

3.  Press the 

CMD button. The display shows 

*System Command*. 

 

4.  Press the 

4 button then the 1 button to send a 

test report. 

Press the 

4 button then the 2 button to send a 

status report. 

 

If you prefer, you might use the function 
list in place of Steps 3 and  4 to initiate 
this function. 

Press the Menu button to enter the 
function list. 

Press the Next button repeatedly. 

When you reach the Send Report button, 
press it. 

 

Another menu appears allowing for the 
selection of sending a test report (Test 
Rpt) or a status report (Status Rpt). 
Press either button. 

 

5.  The keypad shows 

Sending report… Please 

wait… until the report is transmitted to the 
security company.