Bosch Appliances Home Security System D1265 User Manual
D1265 | Owner's Manual | Part III: Advanced Commands
36
Bosch Security Systems, Inc. | 9/10 | F01U169130-02
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
function list.
Press the Next button repeatedly.
When you reach the Remote Program
button, press it.
button, press it.
Press ENTER.
7. The display shows
RPS connecting…
8. The security system now allows RPS to connect
over the phone line or over the network to the
control panel.
control panel.
9. At the conclusion of the programming session
your system sends a report to the security
company and then returns your telephone to
normal service and your display to idle text.
company and then returns your telephone to
normal service and your display to idle text.
For systems with a phone number configured
My system uses a phone number for Remote
Programming
Programming
1. Ensure your keypad shows idle disarmed text.
2. Press the
CMD button. The display shows
*System Command*.
3. Press the
4 button then the 3 button.
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
function list.
Press the Next button repeatedly.
When you reach the Remote Program
button, press it.
button, press it.
Press ENTER.
4. Select
RPS via Phone.
5. The display shows
RPS connecting…
6. The security system now calls the telephone
number specified for the remote programming
session.
session.
7. At the conclusion of the programming session
your system sends a report to the security
company and then returns your telephone to
normal service and your display to idle text.
company and then returns your telephone to
normal service and your display to idle text.
For systems with a network connection
My system uses an IP Address and network
connection for Unattended Remote
Programming
connection for Unattended Remote
Programming
1. Ensure your keypad shows idle disarmed text.
2. Press the
CMD button. The display shows
*System Command*.
3. Press the
4 button then the 3 button.