Bosch Appliances Home Security System D7212G User Manual

D7212G

Page 21

© 2003 Bosch Security Systems

4998138544C

Installation

3.0

Installation

3.1

Before Beginning

This section contains a general installation procedure and provides references to other sections of the guide for detailed
instructions.

Bosch Security Systems recommends a review of this guide and the D7212G Program Entry Guide (P/N: 4998138538) before
beginning the installation to determine the hardware and wiring requirements for the features that will be used.

Have the following additional documents available when reading through this guide:

• D7212G Program Record Sheet (P/N: 4998138542)

• Security System Owner’s Manual (P/N: 71-06633-000)

• Command Center Installation Manual (D1255, D1256, D1257, D1260, or D720)

Before beginning the installation, become familiar with the operation of the D5200 Programmer or the Remote Account
Manager (RAM IV).

3.2

Enclosure Options

Mount the control/communicator assembly in any of the Bosch Security Systems enclosures listed below. Refer to the
D7212G Approved Applications Compliance Guide (P/N: 4998138560) to determine if the application requires a specific
enclosure.

• D8103 Universal Enclosure (tan)

• D8109 Fire Enclosure (red)

• D8108A Attack Resistant Enclosure (tan)

3.3

Beginning the Installation

1.

Mount the enclosure in the desired location. Use all five mounting holes. See Figure 2.

POINT CHART LABEL

MOUNTING

SKIRT HOOK

MODULE MOUNTING

LOCATIONS

MODULE

MOUNTING

LOCATIONS

TAMPER SWITCH

MOUNTING LOCATION

MOUNTING

SKIRT HOOK

SKIRT MOUNTING HOLE

MOUNTING

SKIRT HOOK

OPENINGS

LOCK DOWN TAB

BACK OF

D7212G

2.

Run the necessary wiring throughout the premises, and pull the wires into the enclosure.

EMI (Electro Magnetic Interference) may cause problems. Refer to EMI on Long Wire Runs in the D9412G/D7412G/
D7212G Installation and Troubleshooting Quick Reference Guide (P/N: 43700).