Bosch Appliances Home Security System 3.5 User Manual
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
en | 335
6 Submit the changes. Note that the changes are not
42.5 Call
station
42.5.1 Add a call station
Adding a call station to the system definition is similar
to adding a power amplifier (see section 42.4.1). Go to
Configure > System definition > Call station, click the Add
button and:
•
to adding a power amplifier (see section 42.4.1). Go to
Configure > System definition > Call station, click the Add
button and:
•
Enter a name for the call station in the Name field.
The name may consists of up to 16 characters.
The name may consists of up to 16 characters.
•
Select the type of call station from the Call station type
dropdown list (see table 42.2).
dropdown list (see table 42.2).
•
If an numeric keypad is connected to the call station,
tick the Numeric keypad box.
tick the Numeric keypad box.
•
Select the number of connected extensions (keypads)
from the extension dropdown list.
from the extension dropdown list.
•
Enter the hexadecimal serial number of the call
station in the Serial number field. For the remote call
station or remote call station kit, enter the serial
number of the connected call station interface.
station in the Serial number field. For the remote call
station or remote call station kit, enter the serial
number of the connected call station interface.
42.5.2 Delete a call station
Deleting a call station from the system definition is
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Call station, select
the call station that has to be deleted and click the Delete
button.
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Call station, select
the call station that has to be deleted and click the Delete
button.
42.6 Audio expander
42.6.1 Add an audio expander
Adding an audio expander to the system definition is
similar to adding a power amplifier (see section 42.4.1).
Go to Configure > System definition > Audio expander, click
the Add button and:
•
similar to adding a power amplifier (see section 42.4.1).
Go to Configure > System definition > Audio expander, click
the Add button and:
•
Enter a name for the audio expander in the Name
field. The name may consist of up to 16 characters.
The name is also shown on the display of the audio
expander.
field. The name may consist of up to 16 characters.
The name is also shown on the display of the audio
expander.
•
Enter the hexadecimal serial number of the audio
expander in the Serial number field.
expander in the Serial number field.
42.6.2 Delete an audio expander
Deleting an audio expander from the configuration is
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Audio expander,
select the audio expander that has to be deleted and
click the Delete button.
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Audio expander,
select the audio expander that has to be deleted and
click the Delete button.
table 42.2: Call station types
Model
Type
LBB4430/00
Basic
LBB4433/00
Basic kit
PRS-CSR
Remote
PRS-CSRK
Remote kit
figure 42.12: Call station definition
figure 42.13: Audio expander definition