Bosch Appliances Home Security System 3.5 User Manual
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
en | 336
42.7 Fiber
interface
42.7.1
Add a fiber interface
Adding a fiber interface to the system definition is
similar to adding a power amplifier (see section 42.4.1).
Go to Configure > System definition > Fiber interface, click
the Add button and:
similar to adding a power amplifier (see section 42.4.1).
Go to Configure > System definition > Fiber interface, click
the Add button and:
•
Enter a name for the fiber interface in the Name field.
The name may consist of up to 16 characters.
The name may consist of up to 16 characters.
•
Enter the hexadecimal serial number of the fiber
interface in the Serial number field.
interface in the Serial number field.
42.7.2 Delete a fiber interface
Deleting a fiber interface from the system definition is
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Fiber interface, select
the fiber interface that has to be deleted and click the
Delete button.
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Fiber interface, select
the fiber interface that has to be deleted and click the
Delete button.
42.8 CobraNet
interface
42.8.1 Add a CobraNet interface
Adding a CobraNet interface to the system definition is
similar to adding a power amplifier (see section 42.4.1).
Go to Configure > System definition > CobraNet interface,
click the Add button and:
•
similar to adding a power amplifier (see section 42.4.1).
Go to Configure > System definition > CobraNet interface,
click the Add button and:
•
Enter a name for the CobraNet interface in the Name
field. The name may consist of up to 16 characters.
The name is also shown on the display of the
CobraNet interface.
field. The name may consist of up to 16 characters.
The name is also shown on the display of the
CobraNet interface.
•
Enter the hexadecimal serial number of the
CobraNet interface in the Serial number field.
CobraNet interface in the Serial number field.
42.8.2 Delete a CobraNet interface
Deleting a CobraNet interface from the system
definition is similar to deleting a power amplifier
(see section 42.4.2). Go to Configure > System definition >
Cobranet interface, select the CobraNet interface that has
to be deleted and click the Delete button.
definition is similar to deleting a power amplifier
(see section 42.4.2). Go to Configure > System definition >
Cobranet interface, select the CobraNet interface that has
to be deleted and click the Delete button.
Note
Only PRS-FIN(S) Fiber Interfaces have to be
Only PRS-FIN(S) Fiber Interfaces have to be
configured. PRS-FINNA Fiber Interfaces cannot
be configured.
figure 42.14: Fiber interface definition
figure 42.15: CobraNet interface definition