Bosch Appliances DVR DVR4C User Manual

Page of 26
Bosch Security Systems | Version 1.1
DVR4C | Installation Manual | Menu system
EN | 16
4.6
System Settings >
Use the System Settings menu to get access to those items 
that are used to configure the system.
>> LANGUAGE
A language is selectable from the list with the up/down 
scroll keys. Press the play key to confirm.
>> AUDIO
An audio input can be set to record with its 
corresponding video input. Audio 1 is mapped to video 
1, audio 2 to video 2, audio 3 to video 3 and audio 4 to 
video 4.
For a Quad screen display in live mode, the 4 audio 
channels are mixed. For a Quad screen display in 
playback mode, no audio is played back. Audio is only 
played back in forward, real-time and full screen 
playback.
Audio monitoring, recording and gain can be configured 
per profile for each channel in the table.
>> TEXT
The DVR can record and display ASCII data on the 
monitor. The external device can be a text input device.
>>> RECORDING
Set On to record text data on the hard disk of the 
DVR. Text is recorded separately from images, but is 
synchronized based on time information.
>>> MONITORING
Set On to display live text data on a monitor. Text is 
overlayed on the live image.
>>> SYNC TEXT WITH
Select All to display (and record) text data on all 
channels (in a quad screen display, text appears in the 
upper-left channel.) Text can also be displayed (and 
recorded) with a specific channel only.
>>> SEEK HEADER
If the text device sends a header, set to On.
If a header is sent, select a single or a double line 
header.
>>> DELIMITER
If the text device sends an end-of-line delimiter, enter 
its value.
>>> TIMEOUT
If the text device does not send a delimiter, the text is 
recorded as a single block. Enter the time (in 
milliseconds) that must expire after the last received 
character to separate text blocks.
>>> LINES
If the text device does not send a delimiter or use a 
timeout, enter the number of lines to be used for a 
single block of text.
>> CONNECTIVITY
The Connectivity menu gives access to settings that control 
the behavior of the unit with respect to all external devices 
or a network. 
>>> NETWORK
Select the type of connection; Ethernet or xDSL.
Set DHCP to On to have IP address, subnet mask and 
default gateway assigned automatically by the 
network DHCP server.