Bodum Blender K11179 User Manual

–   Place the appliance on a stable, horizontal surface that 

is neither hot nor near a heat source. The surface must 

be dry. Keep the appliance and cord out of the reach of 

children.

–   Check that the voltage indicated on the rating label of the 

appliance corresponds to the local mains voltage. Connect 

the appliance only to a properly earthed wall outlet with 

an output rating of at least 6 A. (Use a residual current 

device (RCD) – please contact a qualified electrician for 

advice.) The wall outlet must be easily accessible while 

the appliance is in use in case of emergency. The manu-

facturer is not responsible for accidents caused by poor or 

inexistent grounding of the appliance.

–   If the plug provided with the appliance is incompatible with  

the wall outlet, have it changed by a qualified electrician.

1    Motor unit
2    Blender wand
3    Blender head
4    Low-speed button
5    High-speed button
6    Mains cord
7  Multiblade
8  Whisk
9  Beater
10   Lidded  beaker
11   Tool for removing the attachments

MAINS CORD

–  If care is taken, a mains extension cable can be used.
–   If a mains extension cable is used, its electrical rating must 

at least match that of the appliance; if the appliance is 

earthed, the extension cable must be a three-core earthed 

cable. The lengthened cable must not be allowed to hang 

over the edge of the table or counter: children must 

not be able to pull on it, and it must not be allowed to  

present a trip hazard.

–    For USA – Canada 

   This appliance has a polarized plug (one blade is wider 

than the other). To reduce the risk of electric shock, this 

plug will fit in a polarized outlet only one way. If the plug 

does not fit fully in the outlet, reverse the plug. If it still 

does not fit, contact a qualified electrician. Do not modify 

the plug in any way.