Bixolon Receipt Printer SRP-270 User Manual

 

1. Mack sure the printer is turned off with the “Off”   

  side of the switch is pressed down. 

2. Check the label on the AC Adapter to make sure the 

voltage required by the AC Adapter matches that of the 
electrical outlet. 

3. Plug the DC cord connector into the power jack on the 

printer. 

4. Plug the AC Adapter power cord into the wall outlet. 

1. Turn off the printer, host ECR and Computer. 
2. Plug RS-232, RS-485, USB or Parallel Cable 

connector into the I/F connector on the printer. 

3. Tighten the screws on both sides of the connector. 
4. Turn on the printer, host ECR and Computer. 
 

 
 
 
 
2-1-4 Ribbon Cartridge Installation 

1. Turn the printer off. 
2. Plug the Cash Drawer cable connector into the 

connector on the printer. (To remove the Cash Drawer   
cable, press the clip on the connector, grasp the 
connector and pull it out.) 

3. Secure the Shield Wire on the bottom of the printer.\ 

 

1. Before inserting the ribbon cartridge, turn the Knob. 
2. Insert the ribbon cartridge. Pay particular attention to 

the placement of the ribbon behind the Print Head. 

3. After inserting the ribbon cartridge, turn the knob 

clockwise again to make sure the ribbon moves freely 
in the cartridge.