Billion Electric Company BIPAC 8501 User Manual

  

Mode:  The SHDSL device can function as a CPE (Customer Premises Equipment) or CO (Central 
Office).    Select CPE mode when the BiPAC 8500 is connecting to your ISP.   

Back – to –back: it is a direct connection between two SHDSL devices which one is set to CPE and the 
other is CO by using a standard RJ-11 telephone cable.   

Annex Type: It is the DSL operating mode standard. Select Annex A or Annex B to support up to 
2.3Mpbs SHDSL function. Select other annex such as Annex B_ANFP / Annex A_B_ANFP, you may 
consult with your ISP first.   

Back – to –back: to be sure the Annex type is the same on the BiPAC 8500 and the remote router.   

Bit Rate Mode: The mode selections are Adaptive and Fixed.    Selecting the Adaptive mode, the best 
connection rate will be automatically negotiated with the CO / ISP.  Selecting the Fixed mode, the 
connection rate will be fixed to the specific fixed bit rate selected with the CO / ISP.     

Fixed Bit Rate: Specify the fix transfer rate when Fixed Mode is selected.  Specify the maximum 
transfer rate when Adaptive Mode is selected. Bit Rate range is from 72kbps ~ 2368kbps.   

Activate Line: Line active true is set by default.  Select false  to disable and true  to enable SHDSL 
SHDSL connection 

Note: Once Active Line is selected as false, you must enable the Active Line to true again and click Apply button to 
reactivate SHDSL connection.   

DSP FirmwareVersion: Display the SHDSL line code firmware version. 

Connected: Display current SHDSL line sync status. 

State: Display current SHDSL line status.   

Bit Rate: Display SHDSL line synch speed rate.   

Click Apply button to apply your changes.

48