Behringer Racktuner BTR2000 User Manual
12
RACKTUNER BTR2000 User Manual
Figure 7.2 shows an example of a more complex configuration.
In this example, the BTR2000 is connected to 2 instruments and a
double footswitch.
MODEL BTR2000
CONCEIVED AND DESIGNED BY
BEHRINGER GERMANY.
MADE IN CHINA
BEHRINGER GERMANY.
MADE IN CHINA
CAUTION
REPLACE FUSE WITH SAME
FUSE TYPE AND RATING.
ATTENTION
UTILISER UN FUSIBLE DE RECHANGE
DE MEME TYPE ET CALIBRE.
(RING = MUTE)
MUTE
SELECT
SOUND
MAIN
INPUT
OUTPUT
FOOTSWITCH
2
1
AC POWER
INPUT
CAUTION
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
ATTENTION
RISQUE DE CHOC ELECTRIQUE!
NE PAS OUVRIR!
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
HPS3000
RACKTUNER BTR2000
SELECT
DIRECT IN
SOUND
MAIN
INPUT 1
INPUT 2
POWERPLAY PRO-XL HA4700
PHONES OUT
(2)
(1)
V-TONE GMX212
Fig. 7.2: Separate playback of metronome click/reference tone (1) and instrument signal (2)
8. Installation
8.1 Rack installation
The BTR2000 requires one height unit (1 HU) for installation in a
19" rack. Be certain to leave an additional 10 cm free in the back for
the connectors. For installation in a rack, M6 machine screws and nuts
should be used.
Ensure a sufficient air supply and to not place your BTR2000 on an
Ensure a sufficient air supply and to not place your BTR2000 on an
end, for example, to prevent the unit from overheating.
8.2 Audio inputs and outputs
All audio inputs and outputs on the BEHRINGER BTR2000 are laid out
as mono TS connectors.
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 8.1: 1/4" TS connector