Behringer Racktuner BTR2000 User Manual

RACKTUNER BTR2000 User Manual

8.3 Footswitch wiring

If a double footswitch is plugged into the SELECT connector on the

back of the BTR2000, the MUTE function is transmitted on the ring

and SELECT is transmitted on the tip.

strain relief clamp
sleeve
ring
tip

sleeve

ground/shield

The non-latching footswitch briefly connects

either the sleeve and the ring or the sleeve and

and the tip.

Stereo plug for non-latching footswitch

ring

mute
tip

select

Fig. 8.2: 1/4" TRS connector plug of a double footswitch

◊

Always make sure that only technically qualified people

install and operate your RACKTUNER. During and after the

installation, all those handling the equipment need to

be sufficiently grounded in order to avoid the potentially

damaging electrostatic discharge or similar damage that

could have a permanent adverse effect on your equipment.

9. Specifications

Audio Connectors

INPUT 1

1/4" TS connector on the front

and back

Input impedance

1 MΩ, relay hard bypass

INPUT 2

1/4" TS connector

Input impedance

1 MΩ, buffered

SOUND

1/4" TS connector

Output impedance

4.5 kΩ

MAIN

1/4" TS connector

Output impedance

500 Ω

Connector for Footswitch

MUTE

1/4" TS connector

SELECT

1/4" TRS connector

Tuner

Scale

12 equally tempered notes

Frequency range

27.5 Hz to 4186 Hz

Reference tone for manual or 440 Hz ± 12 Hz

automatic calibration

Display scale

± 50 Cent (± 0.5 half steps)

Display resolution

± 1 cent, ± 5 cents

Metronome

Tempo range

30 BPM - 240 BPM

Racklight

Illumination

4 x LED, 5 mm, white

Power Supply

Power range

USA/Canada

120 V~, 60 Hz

China

220 V~, 50 Hz

Europe/U.K./Australia

240 V~, 50 Hz

Japan

100 V~, 50 - 60 Hz

Power consumption

9 W

Dimensions/Weight

Dimensions (W x H x D)

approx. 440 x 113 x 483 mm

(1.73 x 4.45 x 19.02")

Weight

approx. 1.24 kg (2.73 lbs)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or shown.