Bosch Appliances Video Game Controller D9412GV2 User Manual
D9412GV2/D7412GV2 | Program Entry Guide | 2.0 GV2MAIN
EN | 21
Bosch Security Systems, Inc. | 10/08 | F01U003636-04
Table 14: Diagnostic Reports (Continued)
Report Selections
Report
Description
Description
R# Checksum Fail Yes, No
Checksum Fail
Event
Event
R# Network Fail
4
Yes, No
Failure of
network
network
R# Network Rest
4
Yes, No
Restoral of
network
network
R# Network Cond
4
Yes, No
Condition of
network
network
1 This event is included in the Expanded Test Report
when an off-normal condition exists..
2 To meet UL 864 requirements for Central Station and
Remote Station applications, enable AC Fail, Battery
Missing, Low Battery, Battery Restoral, and AC
Restoral reports.
Missing, Low Battery, Battery Restoral, and AC
Restoral reports.
3 This event covers Comm Fail Route Group and Comm
Fail Phone. If enabled, both events are sent; if disabled,
neither event is sent
neither event is sent
4 This event is reserved for future use.
Enable Rt Comm Fail and Rt Comm
Restore in only one route group.
Restore in only one route group.
Relay Reports
Selecting Yes enables sending a report when the
event occurs.
event occurs.
Table 15: Relay Reports
Report Selections
Report
Description
Description
R# Sensor
Reset
Reset
Yes, No
Sensor Reset
Event
Event
R# Relay Set
Yes, No
Relay Set Event
R# Relay
Reset
Reset
Yes, No
Relay Reset Event
When activating an on-board relay using
remote automation software, the
D9412GV2 and D7412GV2 Control
remote automation software, the
D9412GV2 and D7412GV2 Control
Panels log and print the resulting event
as:
as:
Relay 250 (Relay A)
Relay 251 (Relay B)
Relay 252 (Relay C)
Relay 251 (Relay B)
Relay 252 (Relay C)
AutoFunc Reports
The following prompts support customized routing of
Auto Function Reports. Selecting Yes enables a
report to be sent when the event occurs.
Auto Function Reports. Selecting Yes enables a
report to be sent when the event occurs.
Table 16: Auto-Function Reports
Report Selections
Report
Description
Yes, No
R# Sked
Sked Executed
Executed
Event
Yes, No
R# Sked
Changed
Changed
Sked Changed
Event
Event
Yes, No
R# Execute
Fail to Execute
Fail
Event
RPS Reports
Selecting Yes enables sending a report when the
RPS Passcode Event occurs.
RPS Passcode Event occurs.
RPS Access Fail can indicate a wrong
RPS passcode when communicating
with the control panel or a valid RPS
session terminated by a means other
than a Good-bye or Reset-bye
command. Remote Reset indicates a
Reset-bye command issued from RPS;
Bad Call to RPS indicates the control
panel called RPS but was unable to
connect.
RPS passcode when communicating
with the control panel or a valid RPS
session terminated by a means other
than a Good-bye or Reset-bye
command. Remote Reset indicates a
Reset-bye command issued from RPS;
Bad Call to RPS indicates the control
panel called RPS but was unable to
connect.