Bosch Appliances Power Supply PSU-224-DC100 User Manual

en | Installation

Power Supply

AR18-10-B002 | v1.1 | 2010.02

Installation manual

Bosch Security Systems

Connecting the input cable

Connect input supply cable as follows:

–

Cut back the insulation of the cable wires to approximately 

5 mm (0.2 in).

–

Pass the input cable through the supplied grommet. 

–

For each wire, push back the tab behind the terminal with 

a small screwdriver and insert the wire (respect the 

polarity shown in the figure); release the tab to clamp the 

wire in place.

–

Secure the grommet firmly. 

–

Return the protective cover to its position and fasten in 

place with the four cross-head screws. 

Tighten screws firmly to ensure protection against water 

ingress.

5 mm 

(0.2 in)

Live In

Neutral In

Earth In

110-230 VAC

50/60 Hz