Bay Technical Associates BayTech DS72 User Manual
DS72 HOST MODULE OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
17
If enabled, the following header and menu appears:
Bay Technical Associates
Unit ID: BAYTECH DS72
Unit ID: BAYTECH DS72
Port Select Code: $BT
Attention Character: ;
Device A (2,1)...........1
Device B (2,2)...........2
Device C (2,3)...........3
Device D (2,4)...........4
DS-RPC (3,1)...........5
Configure.......................C
Status..........................S
I/O Modules Reset...............RM
Unit Reset......................RU
Exit............................X
Logout..........................T
Attention Character: ;
Device A (2,1)...........1
Device B (2,2)...........2
Device C (2,3)...........3
Device D (2,4)...........4
DS-RPC (3,1)...........5
Configure.......................C
Status..........................S
I/O Modules Reset...............RM
Unit Reset......................RU
Exit............................X
Logout..........................T
To toggle the menu status, select #3, “Menu,” from the selection menu,
followed by <cr>. The DS72 module displays the current status and asks if
you want to change:
followed by <cr>. The DS72 module displays the current status and asks if
you want to change:
Menu is............................ Disabled
Enable? (Y/N, CR for no change):
Type “Y” followed by <cr> if you want to enable Menu. Type “N”
followed by <cr> if you want to disable Menu. Type <cr> for no change.
followed by <cr> if you want to disable Menu. Type <cr> for no change.
Auto Connect Port
If Auto Connect Port has been enabled, establishing a communication
link to the DS72 module will connect the user to the designated I/O port.
This also happens when a connection is established via the serial port.
This also happens when a connection is established via the serial port.
NOTE: The auto connect port has priority over the login setup menu. If Auto Connect Port is
enabled, the main menu is automatically disabled.
enabled, the main menu is automatically disabled.
Select # 4, “Auto Connect Port”, from the selection menu, followed by <cr>.
The following Auto Connect Port menu appears:
The following Auto Connect Port menu appears:
Auto Connect Port is..............Module 3,Port 1
Auto Connect is...................Disabled
Change Auto Connect Port..........1
Enable/Disable....................2
Exit..............................X,CR
Enable/Disable....................2
Exit..............................X,CR
Enter Request :
The DS72 module displays the current auto connect port and its current
status. To change the auto connect port module number and port number,
select #1, “Change Auto Connect Port,” followed by <cr>. The DS72
module responds:
status. To change the auto connect port module number and port number,
select #1, “Change Auto Connect Port,” followed by <cr>. The DS72
module responds:
Auto Connect Port is..............Module 3,Port 1
Enter Auto Connect Module (2 to 9) :3
Enter Auto Connect Port (1 to 4) :1
Auto Connect Port is..............Module 3,Port 1
Enter Auto Connect Port (1 to 4) :1
Auto Connect Port is..............Module 3,Port 1