Bay Technical Associates BayTech DS72 User Manual
DS72 HOST MODULE OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
18
Enter the module to connect automatically, followed by <cr>. Enter the port
to connect automatically, followed by <cr>. The DS72 module stores the
new settings in non-volatile memory and returns to the Auto Connect Port
menu.
to connect automatically, followed by <cr>. The DS72 module stores the
new settings in non-volatile memory and returns to the Auto Connect Port
menu.
Toggle Auto Connect Port feature by selecting #2, “Enable/Disable,” from
the Auto Connect Port menu followed by <cr>. The DS72 module displays
the current auto connect port status and asks if you want to enable. Default
Auto Connect Port is disabled.
the Auto Connect Port menu followed by <cr>. The DS72 module displays
the current auto connect port status and asks if you want to enable. Default
Auto Connect Port is disabled.
Auto Connect is...................Disabled
Type “Y” followed by <cr> if you want to enable Auto Connect Port. Type
“N” followed by <cr> if you want to disable Auto Connect Port. Type <cr>
for no change. The DS72 module stores Auto Connect Port configuration in
non-volatile memory and returns to the Auto Connect Port menu.
“N” followed by <cr> if you want to disable Auto Connect Port. Type <cr>
for no change. The DS72 module stores Auto Connect Port configuration in
non-volatile memory and returns to the Auto Connect Port menu.
NETWORK PORT This sets up the network parameters for the DS72.
CONFIGURATION
CONFIGURATION
From the configuration menu, select #9, “Network Port Configuration”,
followed by <cr>. The following menu appears:
followed by <cr>. The following menu appears:
Network Configuration
IP Address: 200.4.2.65
Subnet Mask: 255.255.255.0
Gateway: 200.4.2.1
Ethernet Address: 00.C0.48.06.1A.81
Connection Inactivity Timeout (mins): 1
Carriage Return Translation: Disabled
Break Length (msecs): 350
Subnet Mask: 255.255.255.0
Gateway: 200.4.2.1
Ethernet Address: 00.C0.48.06.1A.81
Connection Inactivity Timeout (mins): 1
Carriage Return Translation: Disabled
Break Length (msecs): 350
IP Address........................1
Subnet Mask.......................2
Gateway...........................3
Activity Timeout..................4
Carriage Return Translation.......5
Break Length......................6
Exit..............................X,CR
Enter Request :
Subnet Mask.......................2
Gateway...........................3
Activity Timeout..................4
Carriage Return Translation.......5
Break Length......................6
Exit..............................X,CR
Enter Request :
IMPORTANT: For network access, you must configure the IP addresses, Subnet Mask, and
Gateway Address. The module must be reset for network changes to take effect.
Gateway Address. The module must be reset for network changes to take effect.
IP Address
The IP address is the network address assigned by your network manager
for your network.The IP Address consist of four bytes, each byte ranging
from 0 to 255. This parameter must be programmed before the DS72
may be accessed via the network.
from 0 to 255. This parameter must be programmed before the DS72
may be accessed via the network.
From the configuration menu, select #1, “IP Address,” followed by <cr>.
The DS72 responds:
The DS72 responds:
Enter Module IP address in dotted decimal form: