Sierra Wireless RAVEN 1X 20070914 User Manual

Page of 203
Configuration Commands
Rev 3.0B Feb.08
 
157
n=0 : Disabled
n=1‐65535 (default 9494)
*PPTIME=n
GPS Report Time Interval. See also *PPMINTIME, *PPTSV, 
+CTA.
n=seconds (1 ‐ 65535) 
Note:  Your cellular carrier may 
impose a minimum transmit time. 
Caution:  A report time of less than 30 seconds can possibly keep an 
RF link up continuously. This will eventually cause the PinPoint X to 
overheat and shutdown. An RF resource may continue be tied up to 
transfer small amounts of data. Generally the RF channel will be 
released and go dormant in 10-20 seconds of no data sent or 
received. 
*PPTSV=n
Timer for Stationary Vehicles. Time interval in minutes that the 
PinPoint X will send in reports when it is stationary. 
n=0 : Disabled 
n=1‐255 minutes 
For example, if *PPTIME=10, the PinPoint X will send in 
reports at least every 10 seconds while it is moving; however, 
once it stops moving, it will slow the reports down to this 
*PPTSV value. 
*UDPRGPS=n
Set or query GPS stamping of UDP Reliable packets. When set, 
data received on the host serial port will be encapsulated with 
the GPS date and time. 
n=0 : Disabled (default)
n=1 : Enabled
I/O
This group includes configuration commands for the digital 
and analog inputs and relay outputs. Some of the values 
shown as a part of this group are not changeable but reflect the 
current status.