Sierra Wireless RAVEN 1X 20070914 User Manual
Configuration Commands
Rev 3.0B Feb.08
159
•
n=1‐2 Input number
•
s=OPEN or CLOSED
Edge/HSDPA
This group includes commands specific to HSDPA, EDGE and
GPRS. If you are not connecting to a modem which uses
HSDPA, EDGE, or GPRS, you will not see this group in the
menu.
GPRS. If you are not connecting to a modem which uses
HSDPA, EDGE, or GPRS, you will not see this group in the
menu.
Figure 1-21: AceManager : EDGE/HSDPA
*NETAPN=apn
Easy entry of the APN. If left blank, the modem will attempt to
use the default subscriber value as defined by the account.
use the default subscriber value as defined by the account.
•
apn=access point name
+CGQMIN
Minimum Acceptable Quality of Service Profile. Change
should be at carrierʹs request. Normally not required to be
changed.
should be at carrierʹs request. Normally not required to be
changed.
+CGQREQ
Set Quality of Service Profile. Change should be at carrierʹs
request. Normally not required to be changed.
request. Normally not required to be changed.
+COPS=mode,[format][,oper]
Manually specify an operator. Refer also to *NETOP.
•
mode=0 : Automatic ‐ any affiliated carrier [default].
•
mode=1 : Manual ‐ use only the operator <oper> specified.
•
mode=4 : Manual/Automatic ‐ if manual selection fails,
goes to automatic mode.
goes to automatic mode.
•
format=0 : Alphanumeric (ʺnameʺ).