Toshiba Strata CIX Developer's Guide

Page of 248
Strata CIX Voice Mail Programming    01/07
10-1
A
d
va
n
c
e
d
 In
te
gr
at
ion
s
 
a
n
d Ap
pl
ic
ati
o
n
s
Advanced Integrations and
Applications
10
This chapter covers procedures for enabling and testing Simplified Message Desk Interface 
(SMDI), Audio Messaging Interchange Specification (AMIS) for the voice mail, CTX Proprietary 
Integration for the Stratagy ES/Strata CIX, and Voice Profile Internet Mail (VPIM) for the 
Stratagy ES.
CIX Integration
With the Stratagy ES software application on the MAS and Strata CIX, all integration 
communication is performed over the IP network connection between the two systems.
All Stratagy ES systems require a network connection to facilitate the integration.This section 
provides the steps needed to configure the Stratagy ES for this integration.
Note
For additional information, see 
You can perform the two wizards—Configuration Wizard and User Setup—in the eManager/Basic 
Configuration menu or you can follow the steps below to configure your Stratagy ES system.
Step 1: Program CIX for Integration
The following Strata CIX programs must be configured for Voice Mail to work with the CIX:
Set up Telephone Station Ports
From eManager, click Advanced Configuration > Station > Assignments and configure Program 
200 Station Assignments (or VMID Wizard) for the following:
FB19 – VM ID sent to Voice Mail = mailbox number. This is usually the same as the PDN, 
however, it can be different (do not include 91, or 92 Vmail integration codes).
FB22 – Message Center (this is VM distributed hunt group pilot number
Optional Station Programming
From eManager, click Advanced Configuration > Station > Assignments and configure Program 
204 Station Assignments DKT Programming
FB23 – Used for the Record to VM feature. Default setting is “Manual” and may be 
changed to “Auto.”