Tekkeon ET6000 User Manual

When used in a car, ezSpeak is designed to be mounted to your car visor. You can use the visor clip with
or without the optional swivel clip.

1. Attach the visor clip to ezSpeak by sliding the clip into the

bracket on the rear of ezSpeak as shown.

2. Slide the clip onto your car visor.

1. Remove the small bracket from the visor clip by lifting up on the prong and pulling the small bracket

away from the visor clip.

2. Attach the swivel bracket to the visor clip by sliding the

bracket onto the clip while lifting the prong. The bracket
will snap into place.

3. Attach the swivel bracket into the bracket on the rear of

ezSpeak as shown.

4. Slide the clip onto your car visor, as shown above,

adjusting the position as needed.

5. Turn the swivel screw to tighten the clip as shown.

et6000_ug_fnl  10/26/06  4:17 PM  Page 6