Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 User Manual

Appendix B: Dialing Translation  69

P0886629 Issue 1.0

FAX Set Up and Operation Guide

The Autoexec.bat file is a file that contains commands a computer automatically 
executes when it starts up. In the following steps you are creating a Autoexec.bat 
file that automatically loads the Dialing Translation Table file into the proper 
location on the Norstar Voice Mail system.

To create the Autoexec.bat file:

1. Open the text editor program you used to create the Dialing Translation Table 

file.

2. Create a new document.

3. Type  

Note: This is the only text that should appear in the file.

4. Save the file as autoexec.bat

Note: The file must be named exactly as shown above. Do not save this file into 

the root directory (C:\) of your computer or you will destroy the existing 
Autoexec.bat file.

To load the files onto the DOS system disk:

1. Insert the DOS system disk that you created earlier into the floppy disk drive 

of your computer.

2. Use the Change Directory command (CD) to move to the directory where the 

Dialing Translation Table file is stored.

3. Type  

  to load the Dialing Translation 

Table file onto the DOS system disk.

4. Use the Change Directory command (CD) to move to the directory where the 

Autoexec.bat file you created is stored.

5. Type  

  to load the 

autoexec.bat file onto the DOS system disk.