jWIN ILuv i903 User Manual

Noise-Canceling Headset w/ Bluetooth wireless technology       V10M10_IM_EN_12072006 

www.i-Luv.com 

                                                                                           
Before using this headset, make sure that it is paired 
with a mobile phone and audio devices with Bluetooth 
wireless technology. To pair with such a device, follow 
the instructions below: 

 
1.  Please make sure the headset is at standby mode. If 

i903 is currently turned on then press the Multi-
Function button for approximately five (5) seconds. 
There will be a high-pitched beep with red light flashes 
about 4 times and headset will go into standby mode. 

 

2.  Press and hold the Multi-function button for approximately five (5) seconds until the 

red and blue lights blink alternately around the button. The headset is now ready for 
pairing. (Note: Pressing the Multi-function button longer than five (5) seconds will 
turn off the headset. If this fails, then turn off the headset and  turn it on again by 
holding the Multi-Function button for five (5) seconds for pairing mode) 

 
3.  Set your mobile phone or audio device to its pairing mode (phones and audio devices 

with Bluetooth wireless technology will have their own pairing instructions. See 
owner’s manual of the phone or device for these instructions).  

                                                                   
4.  Place the mobile phone or audio 

device and the i903 close together 
during pairing. The mobile phone 
and most audio devices will detect 
i903 and identify it, displaying the 
model number i903. 

 
5.  Once the i903 has been identified, confirm as per 

the instructions on the device. You will be required 
to enter a password on the next screen.