LevelOne Network Hardware 11g PoE Wireless Access Point User Manual

Setup 

39 

This is only functional if using Point-to-Multi-Point Bridge (PTMP) 
mode. If enabled, you can specify the MAC addresses of the APs 
which are allowed to connect to this AP. To specify the allowed APs:  
1.  Enable this checkbox  
2.  Click the button "Set PTMP APs".  
3.  On the resulting sub-screen, enter the MAC addresses of the 

allowed APs.  

Use this to open a sub-window where ou can specify the MAC 
addresses of the APs which are allowed to connect to this AP. This is 
only functional if using Point-to-Multi-Point Bridge (PTMP) mode and 
you have enabled the checkbox "In PTMP mode, only allow specified 
APs". 

•  If "Automatic" is selected, the Access Point will select the best 

available Channel.  

•  If you experience interference (shown by lost connections and/or 

slow data transfers) you may need to experiment with manually 
setting different channels to see which is the best.  

This displays the current channel used by the Access Point.