ICOM iPCR100 User Manual

29

5

SCAN OPERATION

■

Auto memory write scan does the same as the programmed
scan and then writes paused signal frequencies into memory
channels of a specified memory bank. Scan edges must be
programmed in advance. (p. 28)

D

q

Make sure the squelch is set to the threshold point. (closed
condition)

w

Click the [SET] button to call up the setting screen if it is
not displayed.

e

Click the [Program SCAN] tab to show the program list.

r

Select the programmed scan edges to be scanned with the
mouse, then click the [Auto MW SCAN] tab.

t

Select a memory bank to be written.

• To clear the selected memory bank contents, click [All Clear].

y

Click the [AUTO] button to start auto memory write scan.

• “AUTO” flashes while scanning.

u

To cancel the scan, click [STOP] or [AUTO].

D

q

Make sure the squelch is set to the threshold point. (closed
condition)

w

Call up the setting screen if it is not displayed.

• Click the [MENU] button and select the ‘Function Setting (SET).’
• When the scan controller screen is in use, click the [SET] button

on the screen.

e

Click the [Program SCAN] tab to show the program list.

r

Select the programmed scan edges to be scanned with the
mouse, then click the [Auto MW SCAN] tab.

t

Select a memory bank to be written.

• To clear the selected memory bank contents, click [All Clear].

y

Call up the scan controller screen if it is not displayed.

• Click the [MENU] button and select the ‘Scan Controller.’

u

Click the [AUTO] button to start auto memory write scan.

• “Auto MW SCAN” flashes while scanning.

i

To cancel the scan, click [STOP] or [AUTO].

[AUTO]

[STOP]

[SET]