ICOM iPCR100 User Manual
30
5
SCAN OPERATION
■
Memory scan
This function searches all memory channels in a selected
memory bank.
memory bank.
D
Using the multi-function receiver screen
q
Make sure the squelch is set to the threshold point. (closed
condition)
condition)
w
Click the [BANK
∧
] or [BANK
∨
] button to select the de-
sired memory bank.
• When using the memory list screen, click [BANK
#
]/[BANK
$
]
or select a bank name with [
$
] to select a memory bank.
e
Click the [SET] button to call up the setting screen if it is
not displayed.
not displayed.
r
Click the [Memory SCAN] tab.
t
Make sure the check boxes are not checked (
%
) then click
the close ([
"
]) button.
y
Click the [MEMO] button to start memory scan.
• “MEMO” flashes while scanning.
u
To cancel the scan, click [STOP] or [MEMO].
D
Using the multi-function receiver screen
q
Make sure the squelch is set to the threshold point. (closed
condition)
condition)
w
Click the [BANK] button and select the desired memory
bank.
bank.
• When using the memory list screen, click [BANK
#
]/[BANK
$
]
or select a bank name with [
$
] to select a memory bank.
e
Call up the setting screen if it is not displayed.
• Click the [MENU] button and select the ‘Function Setting (SET).’
• When the scan controller screen is in use, click the [SET] button
• When the scan controller screen is in use, click the [SET] button
on the screen.
r
Click the [Memory SCAN] tab.
t
Make sure the check boxes are not checked (
%
) then click
the close ([
"
]) button.
y
Click the [MEMO] button in the scan controller screen to
start memory scan.
start memory scan.
• “Memory SCAN” flashes while scanning.
u
To cancel the scan, click [STOP] or [MEMO].
Not checked for the memory scan