Elmo Computer Hardware 1.1 User Manual

Page of 72
Chapter 3: Installation 
3.1 Site 
Requirements 
You can guarantee the safe operation of the Guitar by ensuring that it is installed in an 
appropriate environment. 
Feature Value 
Ambient operating temperature 
°C to 40 °C (32 °F to 104 °F)   
Maximum relative humidity 
90% non-condensing 
Operating area atmosphere 
No flammable gases or vapors permitted in area 
Models for extended environmental conditions are available. 
 
 
The Guitar dissipates its heat by convection. The maximum operating ambient 
temperature of 0 
°C to 40 °C (32 °F to 104 °F) must not be exceeded. 
3.2 
Unpacking the Drive Components 
Before you begin working with the Guitar, verify that you have all of its components, as 
follows: 
  The Guitar servo drive  
  The Composer software and software manual 
The Guitar is shipped in a cardboard box with styrofoam protection.  
To unpack the Guitar: 
1.  Carefully remove the servo drive from the box and the Styrofoam.  
2.  Check the drive to ensure that there is no visible damage to the instrument. If any damage 
has occurred, report it immediately to the carrier that delivered your drive. 
3.  To ensure that the Guitar you have unpacked is the appropriate type for your 
requirements, locate the part number sticker on the side of the Guitar. It looks like this: 
 
Guitar Installation Guide 
MAN-GUIIG (Ver. 1.1) 
 
3-1