Clearsounds CS-CLA7BT User Manual

10 – ENGLISH

11 – ENGLISH

securely clicked in place. There will be two

distinct clicks.

2.  Make sure your CLA7BT is paired to the

device you wish to use

3.  Switch your hearing aid to “T” or “MT”

mode when ready to make or receive a call.

Press the Multi-Function button on the side of

the CLA7BT. A series of 4 tones (low to high)

can be heard from your hearing aid when it is

in t-coil mode and the LED flashes 2 times (0.1

seconds)

Press the Multi-Function button on the side of

the CLA7BT. A series of 4 tones (high to low)

can be heard from your hearing aid when it is

in t-coil mode and the LED flashes 2 times (0.5

seconds) and the LED is off.

The  receiving  volume  can  be  adjusted  during

a  call.  Use  the  volume  control  knob  located

on  the  right  side  of  the  unit  when  it  is  being

worn. The volume setting on the cell phone or

other  device  will  add  or  remove  amplification

CLA7BT-EN,SP,FR.indd   11

9/9/08   10:45:01 AM