Clearsounds CS-CLA7BT User Manual

8 – ENGLISH

9 – ENGLISH

With the CLA7BT and phone in close proximity
1  With your CLA7BT off, press and hold the

Multi Function Button on the left side of

your neckloop for more than 3 seconds.

After the LED indicator lights up steadily,

the neckloop is in pairing mode.

2  Perform a device discovery from your phone

(for the detail on device discovery for your

phone, refer to your owner’s manual).

When the scan is complete, the phone

displays the devices found

3  Select BT 107 from the list of devices

discovered and confirm per the

requirements of your phone.

4  When prompted by the phone, enter the

passkey 0000. Your phone will confirm

that bonding occurred and the CLA7BT will

confirm it paired successfully with 10 rapid

flashes.

5  The phone information is now stored in the

CLA7BT memory.

so they are within operable range.
If the neckloop is not successfully paired within

2  minutes,  it  will  automatically  leave  pairing

mode. If you still want pairing, you will need to

repeat the steps listed above.

CLA7BT-EN,SP,FR.indd   9

9/9/08   10:45:01 AM