C. E. Smith 52100 User Manual

 

 

C.E. Smith Company

 Greensboro, NC  USA 

 

The

 

 52100 Ttop provides a bolt together custom fit on virtually any 

center console boat.  Bolt together construction relieves the stresses from engine 
vibration and wave shock that can crack 100% welded Ttops.   Made from 316L 
stainless steel, your 

 52100 Ttop will provide years of service with 

minimum maintenance including occasional polishing and hosing off salt spray 
after use.   Your 

 Ttop is designed to provide shade to the boater 

and to support optional accessories such as antennas, rod holders, a storage 
bag or electronics box.   It is very strong, but is not to be used as a pylon for 
skiing, wake boarding or for towing.  The 

 Ttop’s range of 

adjustment allows it to fit over a wide variety of console sizes and shapes.  
However, there are boats the 

 Ttop will fit that are not built strong 

enough to support a Ttop.   Such boats will require additional reinforcement to 
the deck and or console above and beyond what is provided with this product or 
discussed in these instructions.   It is the responsibility of the purchaser to 
determine when additional reinforcements are needed and to install these 
reinforcements where needed for the Ttop installation to be strong and safe. 

 

 

- 1 -