C. E. Smith 52100 User Manual

 

• Canopy 

Frame. 

•  Left Upright Frame, (

.) 

•  Right Upright Frame, (

.) 

•  Pair of front V-Brace Bars with integrated clamp ends. 

•  V-Brace Console Castings: Front Casting & Top Casting (you will use one) 

•  Installation Hardware Kit 

 

 
•  Canopy Cover (your choice of color to best compliment your boat.) 

•  Standoffs (4 usually required, lengths to be determined for each boat.) 

• Rod 

holders. 

•  Electronics box 54100. 

• Navigation 

light. 

 

 

Your 

 Ttop can be installed using common hand tools.  One person 

can do it alone; however, it is much easier with two people.  Allow 3-5 hours for 
installation.  

Required Tools:  With these common tools you can install your Ttop. 

 
1. Hand drill 
2.  sharp 1/4” drill bit 
3.  sharp 3/16” drill bit 
4.  ½” countersink bit 
5.  #3 Phillips screwdriver 
6. tape measure 
7. pencil 

8. sharpie marker 
9. 3/16” Allen wrench 
10. 7/32”  Allen  wrench 
11. 1/8” Allen wrench 
12. 7/16” end wrench 
13. 9/16” end wrench 

 

Recommended Tools:  We recommend you have the tools listed below, 
especially the long drill bits and long screwdriver extension to make the install 
easier.

 
1.  Cordless variable speed drill 

with torque control 

2.  12” 1/4” drill bit  
3.  12” 3/16” drill bit 
4.  #3 Phillips screwdriver tip 
5.  12” drill extension for #3 tip 

6.  7/16” deep socket ratchet 
7.  9/16” ratcheting  box end 

wrench 

8. Rubber mallet 
9.  Dremel tool (if windshield 

notching is called for) 

 

- 2 -