Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. Emma
  5. User Manual

Sony Emma User Manual

Download
Page of 34
Emma User Guide 
  27
1.
Connect a connector to you computer.
2.
Make sure that the phone battery is fully charged.
3.
Remove the phone battery.
4.
Remove the SIM Card.
5.
Reinsert the battery.
6.
Power on the phone.
7.
Connect the phone to the connector.
8.
If drivers are needed you need to install these. To get a complete installation this
step may be repeated several times.
9.
Wait for identification to start.
10.
If you see the Activation service in the Service list go to step 11. Otherwise click
on 
Server Search
 in Service details.
11.
Click on the Customization Activation service in the Service list.
12.
Click 
Apply service
 in Service Details.
13.
If it is the first Activation service you are running you must enter the USB
activation dongles PIN code (later Activation services will not require the dongle
PIN code until Emma is restarted).
14.
Wait for the service to finish.
15.
Disconnect the phone from the connector.
16.
Power off the phone.
17.
Power on the phone.
18.
Press >*<<*<* on the phone to go to the Service menu.
19.
In the Service menu, go to  
Service info
 
> SIM lock
  and check that the locks
are unlocked. Most locks will be unlocked after the Activation. If the locks are
locked and the digits are all zeroes, then the Activation has failed.
20.
Power off the phone.
Running a Service Exchange Unit (DPY/Z) Service
1.
Connect the connector/cable to your computer.
2.
Make sure that the phone battery is fully charged.
3.
Power off the phone.
4.
Remove and reinsert the phone battery.
5.
Connect the phone to the connector/cable. If it is a USB-connected phone,
press and hold the C-button (or equivalent) on the phone when connecting.
6.
Wait for the identification to finish.
7.
If you see the DPY/Z (Service Exchange Unit) service in the Service list go to
step 8. Otherwise click on 
Server Search
 in Service details.
8.
Click on the DPY/Z (Service Exchange Unit) service in the Service list.
9.
Click 
Apply Service
 in Service Details.
10.
If you already have downloaded the service go to step 11. Otherwise, click 
OK
in the Download Service window.
11.
Wait for the service to finish.
12.
Disconnect the phone from the connector.
13.
Power on the phone. The phone automatically shuts down after a while.
14.
Power on the phone.
15.
Press >*<<*<* on the phone to go to the Service menu.
16.
In the Service menu, go to  
Service info
 
> Software info
 .