Raritan Computer Home Theater Server KX2101-v2.20-0B-E User Manual

 

Chapter 11: Command Line Interface (CLI) 

 

The Configuration > Network commands are used to configure the KX II-
101 network connection and device name. 

interface 

Configure the KX II-101 device 
network interface. 

name 

Set the device name. 

 

 

The name command is used to configure the device and host name. 

Syntax  

name [unitname name] [domain name] [force 
<true|false>]

 

name Command Example 

The following command sets the device name: 

Admin Port > Config > Network > name unitname 
<device name> domain <host name> force trues

 

 

 

The interface command is used to configure the KX II-101 network 
interface. When the command is accepted, the device will drop the 
HTTP/HTTPS connection and initialize a new network connection. All 
HTTP/HTTPS users must reconnect to the device using the new IP 
address and the correct username and password. See 

 (on page 9). 

The syntax of the interface command is: 

interface [ipauto <none|dhcp>] [ip <ipaddress>] 
[mask <subnetmask>] [gw <ipaddress>] [mode 
<auto/10hdx/10fdx/100hdx/100fdx]

 

The network command options are described in the following table. 

 

ipauto 

Static or dynamic IP address 

ip ipaddress 

IP address of the KX II-101 assigned for 
access from the IP network 

mask subnetmask 

Subnet mask obtained from the IP 
administrator