Raritan Computer Home Theater Server KX2101-v2.20-0B-E 사용자 설명서
Chapter 11: Command Line Interface (CLI)
217
Network
The Configuration > Network commands are used to configure the KX II-
101 network connection and device name.
101 network connection and device name.
Command
Description
interface
Configure the KX II-101 device
network interface.
network interface.
name
Set the device name.
Name Command
The name command is used to configure the device and host name.
Syntax
name [unitname name] [domain name] [force
<true|false>]
<true|false>]
name Command Example
The following command sets the device name:
Admin Port > Config > Network > name unitname
<device name> domain <host name> force trues
<device name> domain <host name> force trues
Interface Command
The interface command is used to configure the KX II-101 network
interface. When the command is accepted, the device will drop the
HTTP/HTTPS connection and initialize a new network connection. All
HTTP/HTTPS users must reconnect to the device using the new IP
address and the correct username and password. See
interface. When the command is accepted, the device will drop the
HTTP/HTTPS connection and initialize a new network connection. All
HTTP/HTTPS users must reconnect to the device using the new IP
address and the correct username and password. See
Installation and
Configuration
(on page 9).
The syntax of the interface command is:
interface [ipauto <none|dhcp>] [ip <ipaddress>]
[mask <subnetmask>] [gw <ipaddress>] [mode
<auto/10hdx/10fdx/100hdx/100fdx]
[mask <subnetmask>] [gw <ipaddress>] [mode
<auto/10hdx/10fdx/100hdx/100fdx]
The network command options are described in the following table.
Command Option
Description
ipauto
Static or dynamic IP address
ip ipaddress
IP address of the KX II-101 assigned for
access from the IP network
access from the IP network
mask subnetmask
Subnet mask obtained from the IP
administrator
administrator