XBLUE Networks 45p SLT User Manual
XBLUE Networks
17
Single Line Telephone User Guide
Pulse to
To
ne (D
TMF) Con
version
The Phone Lock/Unlock feature allows a user to prevent ANY outgoing CO Line calls from
their extension. The extension password is used to lock/unlock the telephone. This feature
code is also used to program your private four-digit extension password.
The use of the feature (Phone Lock) will block all CO Line calls, including emergency calls
such as “911”. Therefore, it is not recommended that any telephone be locked.
Conditions
1.
When an extension is locked it can only make intercom calls; answer and retrieve calls
on hold are not affected.
2.
If a user forgets their password it may be retrieved via the system database administra-
tion.
3.
The programmed Attendant’s Private Password is used to enter Attendant Administra-
tion.
4.
If a CO Line or CO Line call is attempted from a locked telephone, error tone will be
heard.
Pulse to Tone (DTMF) Conversion
*
The Pulse to Touch Tone (DTMF) conversion feature enables the system to use Dial Pulse
(rotary) outgoing telephone company lines and access special services which require DTMF
tones. A limited number of applications may still only support Pulse dialing for outgoing
calls, but after reaching an outside party the use of Touch Tone mode may be required.
Conditions
1.
The dialing conversion can only be from pulse mode to tone DTMF mode, not from
DTMF back to pulse mode.
2.
The Pulse to Tone code can be programmed in any speed dial bin.
3.
When making a call on a CO Line with Pulse Rotary dialing, the digits following”
*
“will
be sent in DTMF tone mode.
Recall
The Recall feature pertains to calls that are parked, on hold, or calls that have been trans-
ferred to another extension. Calls which go unanswered after a preset period of time are