XBLUE Networks 45p SLT User Manual
Single Line Telephone User Guide
18
XBLUE Networks
Re
m
in
de
r T
on
es
“recalled” to the extension which initiated the park, hold or transfer. Recall reduces the
possibility that a call will go unattended.
possibility that a call will go unattended.
Conditions
1.
Recalling telephone company lines will follow Call Forward destination settings.
2.
Recalls are not directed to the programmed Alternate Attendant extension.
3.
When a holding or transferred call begins to recall, the outside party will hear transfer
ring-back tone.
4.
During recall, the CO line returns to System Hold allowing any extension with normal
CO Line receive privileges to retrieve the recalling line.
Reminder Tones
Reminder Tones are heard when accessing an intercom dial tone from an extension that
has Call Forward or Do Not Disturb is enabled. This “stutter” dial tone is actually a rapid,
recurring break in the intercom dial tone which reminds the user of the current extension
availability status. If Call Forward or Do Not Disturb is activated, this reminder tone will be
heard when the extension user places an intercom call.
heard when the extension user places an intercom call.
Conditions
1.
Once a digit is dialed the reminder tone is removed until the next time intercom dial
tone is heard.
Single Line Telephone ‐ Flash
Single Line Telephones and similar analog devices uses a Hook-switch Flash or Flash button
to administer call-processing operations like transfer and hold. This fundamental call con-
trol is handled in the form of specific hook-switch operations. These are known as Hook-
switch Flash or just Flash commands.
Conditions
N/A