XBLUE Networks 45p SLT User Manual

Page of 29
Single Line Telephone User Guide
20
XBLUE Networks
W
arning 
To
ne / CO Line 
Cal
l Limiter
ring party with the option to reroute the call being transferred if the selected destina-
tion is determined not appropriate. 
Unscreened Transfer – simply delivers the call to the destination selected regardless of 
the destination readiness to accept the call.
Until the transfer is complete, the outside line is placed on Exclusive Hold and can only be 
retrieved by the transferring telephone or the receiving telephone.
Calls that are transferred are subject to a unique transfer recall time. Transferred calls that 
go unanswered at the destination will recall (ring) to the transferring party when this timer 
expires. There are two recall timers that affect transferred calls; Transfer Busy Recall Time 
and Transfer Idle Recall Time. Idle and Busy represent the status of an extension for unsu-
pervised transfer scenarios. (If the extension destination is busy the Transfer-Busy Timer is 
used. If the extension destination is idle the Transfer-Idle Timer is used.)
Conditions
1.
Transferred CO Lines that recall are placed on system hold at the time the recall occurs.
2.
When a transferred CO Line recalls, the line number and extension number where the 
call was transferred will be displayed.
3.
The transferred connection party will hear ring-back tone while the call is transfer ring-
ing.
4.
CO Line calls and intercom calls may be transferred.
5.
In screened transfer, if the destination extension answers the intercom call in Voice 
Announce Hands-free mode and does not go off hook, the transferred connection will 
transfer ring at that extension.
6.
In screened transfers, if the destination extension answers the intercom call by lifting 
the handset, the transferred connection is connected to the destination extension 
immediately when the transfer operation is complete.
Warning Tone / CO Line Call Limiter
Each extension may be programmed with a warning tone, and telephone company line call 
limiter. Each inbound or outbound call is monitored for the length of the call, once the 
warning time timer is reached the caller will receive the warning tone every 20 seconds for 
the duration of the call. In addition, the extension can be programmed to terminate the call 
after the first warning tone is heard. This feature is useful in a lobby or retail environment 
where lengthy calls are to be discouraged.