VeriFone 900 User Manual
Setting the Internal DIP Switches
A set of four DIP switches is located under the paper
holder on the bottom of your Printer 900. Make sure that
these switches are set as indicated below before
connecting and operating the printer. The printer will not
operate properly if the switches are not set correctly.
holder on the bottom of your Printer 900. Make sure that
these switches are set as indicated below before
connecting and operating the printer. The printer will not
operate properly if the switches are not set correctly.
Figure 3. Location of DIP Switches
CAUTION: Always disconnect the power before changing
the DIP switch settings.
the DIP switch settings.
Refer to the table below for the proper DIP switch
settings. If you are not sure of which settings to use, refer
to the reference manual for your terminal or computer’s
application program.
settings. If you are not sure of which settings to use, refer
to the reference manual for your terminal or computer’s
application program.
Switch 1
Parity
Even Parity
Even Parity
on
(default setting)
Odd Parity
off
Switch 2
Word Length (data bits)
7 bit word
7 bit word
off
(default setting)
8 bit word
on
(no parity)
Switches 3
and 4
Baud Rate
Switch 3
Switch 4
1200
on
on
2400
on
off
4800
off
on
9600
off
off
(default setting)
ON
5