VeriFone 900 User Manual

1. Remove the ribbon cover by pressing the front tab and

lifting the cover up.

2. If you are replacing an old ribbon, pull up on the lift tab

on the right side of the cartridge (see Figure 6), remove
the cartridge and discard it.

3. Remove the new ribbon

cartridge from its protec-
tive packaging and in-
sert it, left side first, into
the printer. Be sure the
round knob is facing up
and the ribbon fabric fits
between the print head
and the ribbon guide.

4. Press the right side of

the ribbon cartridge into
place (Figure 7). If it
does not fit easily, lift
the cartridge out and try
again. Do not force the
ribbon cartridge into place. 

5. Turn the small

knob on the
cartridge clock-
wise to re-
move any
slack.

6. Insert the two

tabs on the
rear of the rib-
bon cover into
the slots on
the printer.

7.  Press the front

of the cover
down and snap it into place.

Ribbon
Cover

Figure 7.  Replacing the Ribbon Cartridge

Figure 6.  Removing the

Ribbon Cartridge

7