Sharp Digital Signage Software Viewer PNSV01 User Manual

•  “Display area for distributed program”
  When the display area of the program and the resolution 

of the panel are different, this tab allows you to display the 
program regardless of the display area set for the program. 

 Check the “Always display the distributed program in the

following area” check box and set the area in which the
program is to be displayed.

Manages power on target PCs currently being configured.

•  “Shutdown on the designated time” check box
  Check this box to turn off the target PC at the specified time.
•  “Reboot on the designated time” check box
  Check this box to restart the target PC at the specified time.

Sets the FTP Server.

•  “User name”: Must be kept within 30 alphanumeric

characters.

•  “Password”: Must be kept within 30 alphanumeric

characters.

•  “Port Number”: Enter a value between 1 and 32000.

 If you have installed the Viewer Version, a unique FTP Server will be installed, and started as a

service. The default TCP/IP port numbers are 20 and 21. If this port number is already used by
another service, change the port number. The FTP settings of the panels registered with “Panel
Management” on the control PC must use the same port number. (Fp.80)

•  “No panel” option button
  Panels will not be controlled.
•  “Single panel” option button
 Click [Connection Setting] and select the panel control

method (RS-232C/LAN).

•  [Connection Setting]
 Select either “RS-232C” or “LAN” from the [Connecting

interface] option buttons.

RS-232C

COM port

COM1~COM256

COM1

Baud Rate

9600, 19200, 38400

9600

LAN

Host name or IP 
address

Enter the host name or the IP address of the panel to be
controlled within 32 alphanumeric characters.

-

Data port

Enter a data port number between 1025 and 65535 for the
panels to be controlled.

10008

User name

Enter the username, if one exists for the panels to be
controlled, in 8 characters or less.

-

Password

Enter the password, if one exists for the panels to be
controlled, in 8 characters or less.

-