Sharp Digital Signage Software Viewer PNSV01 User Manual
80
Panel Management and Option
Managing panels
4) MAC address
Set the MAC address for the target PC if you want to turn it on from the controller PC.
Set the MAC address for the target PC if you want to turn it on from the controller PC.
5) FTP Setting
Enter the “User name” (within 30 alphanumeric characters), “Password” (within 30 alphanumeric
Enter the “User name” (within 30 alphanumeric characters), “Password” (within 30 alphanumeric
characters), and “Port number” (1-32000) that you set for the target PC FTP settings.
• FTP settings for adding a panel can be set in advance. (Fp.83)
• If you have installed the Viewer Version, a unique FTP Server will be installed, and started as a
service. The default TCP/IP port numbers are 20 and 21. If this port number is already used by
another service, change the port number. The FTP settings of the target PC Client Scheduler
must use the same port number. (Fp.101)
another service, change the port number. The FTP settings of the target PC Client Scheduler
must use the same port number. (Fp.101)
6) Power Control
If you want to turn the power of the target PC on or off at a specified time, select the “Specify to power
If you want to turn the power of the target PC on or off at a specified time, select the “Specify to power
on/off the panel through the server at the designated time”, and set the “Time to start” and “Time to
end”. (Times can be specified in increments of 5 minutes)
end”. (Times can be specified in increments of 5 minutes)
3. Click [Add] or [Cancel].
●Adding/editing a group
1. To add a group, click [Add Group].
The [Add Group] dialog box will appear.
To edit a group, select the group you want to edit and click [Edit].
The [Edit Group] dialog box will appear.
• A group can be created within a group
• It is not possible to create two or more groups with the same name.
2. Select the parent group.
3. Enter a “Group name”.
(Names must be within 50 characters)
4. Click [Add] or [Cancel].