Sharp Digital Signage Software Viewer PNSV01 User Manual
81
Panel Management and Option
●Controlling a panel manually
Set this option when you want to control the target PC manually.
When controlling the target PC manually, (when turning on the panel PC), the Wake On LAN function
that operates by Magic Packets sent from the target PC must be enabled.
If the target PC is outside the same LAN segment, Magic Packets may not get through depending on
router specs and settings. Contact your network administrator for more details.
router specs and settings. Contact your network administrator for more details.
1. Click [Manual Control].
The [Manual Control for the Panel (Panel PC)] dialog box will appear.
2. Check the check boxes next to the panels or groups that
you want to control.
Select a “Control Command”.
The following three control commands can be sent:
The following three control commands can be sent:
• PC Power ON
• PC Reboot
• PC Power OFF
• PC Reboot
• PC Power OFF
3. Click [Execute].
The control command will be sent.
●Deleting a panel or group
1. Select the panel or group that you want to delete.
If you select a group, all the panels assigned to that
group will be deleted.
2. Click [Delete].
A confirmation dialog box will appear.
3. Click [OK].
Managing panels