Panasonic Attune II Installation Instruction
41
English
Maintenance [Maintenance]
This function is used to check the software version of the
Center Module or return the Center Module to the factory
settings.
Center Module or return the Center Module to the factory
settings.
w
wDisplaying the software version
Display the software version of this Center Module.
1
On the Settings screen, touch the
[Maintenance] button, and then the [Software
Version] button.
[Maintenance] button, and then the [Software
Version] button.
* DSP2 and BBIC2 are not displayed for single lane
operation.
w
wData initialization
This function is used to return the settings to the factory
settings. The data, including the registration information for
the All-In-One Headsets or Belt Packs and messages, is
initialized. The date and time settings are not initialized.
settings. The data, including the registration information for
the All-In-One Headsets or Belt Packs and messages, is
initialized. The date and time settings are not initialized.
1
On the Settings screen, touch the
[Maintenance] button, and then the [Factory
Reset] button.
[Maintenance] button, and then the [Factory
Reset] button.
2
Touch the [Execute] button.
w
p The following confirmation pop-up screen is
displayed. To perform initialization, touch the [OK]
button. To cancel initialization, touch the [Cancel]
button.
button. To cancel initialization, touch the [Cancel]
button.
w
p Touch the [OK] button to perform initialization.
w
p After initialization is complete, the system restarts
automatically.
w
p The date and time settings are not initialized.
Note
WX-CC411_PGQP1742ZA_SI_.indb 41
2014/01/17 18:11:39