Tektronix Camcorder 2200 User Manual

2-46

 is used with the keypad to set the rate used by the

 (auto transition) button in the transition areas and by 

the

 button on the E-MEM keypad.

When

 is pressed, the E-MEM display queries:

and any Enable buttons that are on turn off.

The transition rate is then delegated to the desired Transition 
Subpanel by pressing

 or 

. Both of these functions may 

be enabled simultaneously by pressing 

.

After enabling the desired levels, the display queries:

Enter the desired rate using the numeric buttons on the keypad. 
Entering three digits on the keypad automatically enters the rate. 
If only one or two digits are entered, the entry must be completed 
by pressing

. Rates from zero through 999 frames may be 

entered. If one or two digits have been entered, the entry may be 
cleared and the previous rate restored by pressing 

 

again. As soon as the new rate is confirmed, it is displayed in the 
auto transition rate display in the delegated transition 
subpanel(s).

When the transition rate has been set, the

 button turns 

off and the Enable buttons return to their previous state, as does 
the keypad readout display.