Thorens TEM 3200 User Manual
Connecting the TEM 3200
The TEM 3200 is a power amplifier designed to drive any passive HiFi-
loudspeaker. To connect it to your HiFi-equipment you additionally
need a preamplifier, such as the Thorens TEP 3800* to control inputs
and volume.
loudspeaker. To connect it to your HiFi-equipment you additionally
need a preamplifier, such as the Thorens TEP 3800* to control inputs
and volume.
For safe amplifier operation, please use only speakers with
impedance of more than 2 ohms! We recommend speakers
with impedance of more than 4 ohms.
impedance of more than 2 ohms! We recommend speakers
with impedance of more than 4 ohms.
7
Switch off all units before wiring. Disobeying may
cause damage to the speakers.
cause damage to the speakers.
Rear panel connectors
–
A
B
+
1
2
3
4
Audio input
�
As the electric circuit structure of the TEM 3200 is intrinsically sym-
metrical there is only a balanced input jack. Connect this jack to the
BALANCED PRE-OUTPUT jacks of your pre-amplifier. Make sure
that the plug sits tight in the jack and keep in mind the pin configura-
tion: (see next page)
metrical there is only a balanced input jack. Connect this jack to the
BALANCED PRE-OUTPUT jacks of your pre-amplifier. Make sure
that the plug sits tight in the jack and keep in mind the pin configura-
tion: (see next page)
* available 2006